Plex is a popular streaming service that runs free ad-supported videos. You can find the most popular TV shows and movies in its catalogue free of cost. However, it has different libraries for each country. This means you will not have the same content available in every country.
However, you can set up Plex port forwarding and enable remote viewing to circumvent this problem. The entire process is easy to set up and will make your streaming experience more enjoyable. Read on to learn more.
To port forward for Plex, you’ll need to open a port in your router’s firewall for incoming connections. The process for doing this will vary depending on your router. Still, you can usually find the relevant settings by typing your router’s IP address into your web browser and looking for the port forwarding section.
Once you’ve found the port forwarding section, you’ll need to create a new rule. The specific settings will again vary depending on your router. Still, you’ll typically need to specify the protocol (TCP or UDP), the port number (32400 for Plex), and the IP address of the device running Plex.
Check The Automatic Configuration
The actual port forwarding method may differ depending on your router. To find out which method you’ll have to rely on, check if your router supports the UPnP or NAT-PMP auto-configuration. Check your router’s user manual or online documentation to get this information.
If your router does support UPnP or NAT-PMP auto-configuration, add the port number in the WAN/External Port section. Find the port number to use mentioned at the end of this article. Save these settings, and you’re done.
You can still set up port forwarding if your router doesn’t support these. However, you won’t be able to get Plex Media Server to configure a forwarded port automatically. Hence, you’ll have to set it up manually.
How To Manually Set Up Plex Port Forwarding
The process is relatively straightforward and shouldn’t take more than a few minutes. However, make sure you have the latest version of the Plex Media Server installed to avoid any glitches or bugs. Here’s how to set it up:
- Open the Plex Web App and sign in.
- Go to Settings, then click on Server.
- Click on Remote Access.
- Toggle down to Show Advanced.
- Enable the Manually specify public port checkbox.
- Enter the port number in the appropriate box under the WAN/External Port.
- Click on Apply.
You may want to reboot your router for these changes to take effect.
Ports To Use
32400 is the default port, but you can use any available port in the 20000-50000 range.
What is plex?
Plex is a media server application that allows you to stream your media files (music, video, and photos) to any device, including your home theatre system, smartphone, tablet, and more. Plex can be used on nearly any platform, including Windows, Mac, Linux, and even some routers.
How does plex work?
Plex works by organizing your media files and streaming them to the devices of your choice. When you add new files to your Plex library, the server will automatically scan and index the media so it can be played on any of your connected devices.
Why do I need plex?
If you have an extensive collection of media files that you want to be able to access from anywhere in the world, Plex is a great solution. With Plex, you can enjoy your media on any device, including your TV, smartphone, tablet, and more. You can even use Plex to stream live TV, and record shows to watch later.
How do I set up plex?
Setting up Plex is relatively simple. First, you’ll need to download and install the server software on your computer. Once the server is up and running, you can add your media files to the library and stream them to any of your devices.
How do I port forward for plex?
To port forward for Plex, you’ll need to open a port in your router’s firewall for incoming connections. The process for doing this will vary depending on your router. Still, you can usually find the relevant settings by typing your router’s IP address into your web browser and looking for the port forwarding section.
Once you’ve found the port forwarding section, you’ll need to create a new rule. The specific settings will again vary depending on your router. Still, you’ll typically need to specify the protocol (TCP or UDP) and the port number.
